PDF Print E-mail


 Test Instruments

 Portable & Stationery Gas Analysis   Gas Analysers - General
  • For measurement and analysis of burner and flue gas emissions
  • For measurement and analysis of multiple chemical emissions
  • Sample or continuous measurement of diesel generators
  • Suitable versions for domestic, heavy industrial, and commercial premises
Features
  • Portable and static versions to suit most fuel emission analysis
  • Cost effective options
  • Easy to read and use pre-programmed units
  • Options to monitor a range of parameters and gases
  • Well proven designs and operating principals
  • Latest standards applied
  • Excellent service and calibration back up

 

Complete Heating-Check using Flue Gas Analyser EUROLYZER ST   EUROLYSER ST Gas Analysers
  • For Portable measurement and analysis of burner and flue gas emissions
  • For use on domestic, heavy industrial, and commercial premises
Features
  • To DIN EN 15378
  • Cost effective options
  • Easy to read and use pre-programmed units
  • Options to monitor a range of parameters and gases
  • Well proven designs and operating principals
  • Latest standards applied
  • Excellent service and calibration back up

 


KWT 5 Condensate Water Tester

   KWT 5 and TYPE K Thermocouple Condensate Water Tester   44010

Condensate water tester (conductivity principle) for checking fuel oil and diesel fuel tanks. The probe is lowered to the bottom of the tank.The presence of condensate water is indicated by a lamp. When the probe is raised, the lamp extinguishes as soon as the probe reaches the water/oil interface. This allows the exact level of condensate water to be determined. Battery operated. Complete with type K thermocouple probe for use in oil and water.

 


    Handheld Thermometer TM8-IR

 

TM8-IR Handheld ThermometerTM8-IR Handheld Thermometer

 

The TM8-IR temperature measuring instrument is a non-contact infrared thermometer with laser aim and a large, backlit LCD display.
Infrared thermometers are particularly suitable for measuring surface temperatures. The special benefit is the short response time (less than a second) without having to come in contact with the measured object. Therefore, the instrument is particularly suitable for moving (e.g. paper reels, tyres) or live (e.g. electrical assemblies, transformers) parts.
Also used to take measurements in the food industry as there is no physical contact between the sensor and the product.
An additional NiCr-Ni thermocouple can be connected to the instrument.
The ratio of distance to measurement point is 11:1.
The measured object must always be larger than the diameter of the measurement point.

Technical specifications

Measuring range infrared: -33°C/+500°C
Measuring range thermocouple: -64°C/+1400°C
Measuring Accuracy infrared: ±2°C or ±2% of measured value (greater value applies)
Spectral sensitivity: 6/14µm
Accuracy of measurement:
Thermocouple: ±1°C or ±1% of measured value (the greater value applies)
Operating temperature range Ambient: 0/+50°C
Storage/transport: -10/+50°C
Response time: 1 second
Ratio distance to Ø measurement point 11:1
Adjustable degree of emission 0.10~1.00 increments of 0.01
Battery life approx. 140 hours of continuous operation
Dimensions W x H x D: 39 x 175 x 80mm
Weight: 180g (With Batteries)

 


 



 

Valid XHTML and CSS.