PDF Print E-mail


 Automatic Oil De-Aerators

   

Benefits of Automatic Flow-Control:
• Automatic operation eliminates malfunctions.
• The danger of a leak in the return pipe going unnoticed is removed.
• It is no longer necessary to regularly check the return pipe for leaks. 
• The amount of oil drawn from the tank corresponds exactly to the oil burnt.
• The service life of the oil filter is considerably increased compared to dual line operation.
• The suction pipe can usually have a smaller diameter.

    Flow-Control 3/K-1  69930

Flow-Control 3/K-1 Oil De-aerator

 


Consists of a diecast zinc housing with female ¼” connection thread at the tank side and male 3/8” connection threads with 60° cone to connect the burner hoses. The de-aerator hood is made from transparent plastic.
Flow-Control 3/K-1 is for fuel oil (DIN 51603-1), diesel (DIN EN 590) also biodiesel and vegetable oils (rape oil). The device must not be subjected to undiluted additives, alcohol and acids. TÜV-tested (S 159/02)
Flow-Control 3/K-1 (G¼”) 69978
Similar to Flow-Control 3/K-1, but with female G¼” connections at the burner side.

Specification: Burner connection: 3/8” male with 60° cone for burner hose or ¼” female. Tank connection: ¼” female, or oil hose G¼” male x G3/8" union nut for filter connection. Nozzle capacity: Max. 100l/h.  Return flow: Max. 120l/h. Separation capacity air/gas: approx. 4l/h. Mounting position: Float housing vertical. Ambient: Max. 60°C Operating: Max. 60°C,  Special version max. 80°C. Operating overpressure: Max. 0.7bar (corresponds to static oil column of ca. 8 m). Test pressure: 6 bar. Dimensions (WxHxD): 95x150x95mm.

     Flow-Control  3/M  69929

Flow-Control 3/M Oil De-aerator

 


Equipped with two separate float chambers. The first one consists of a metal de-aerator hood with an operating and a de-aerating float. The second one is a transparent plastic safety float chamber. It prevents the oil foam from escaping via the de-aerator opening (e.g. during commissioning/filter exchange) and indicates malfunctions of the de-aerator valve. Connection thread identical to Flow-Control 3/K-1. Also suitable for pressure operation up to 0.7 bar. Flow Control 3/M is recommended for mounting below the maximum fuel oil level in the tank and for any application requiring particular safety.

Specification: Burner connection: 3/8” male with 60° cone for burner hose or ¼” female. Tank connection: ¼” female, or oil hose G¼” male x G3/8" union nut for filter connection. Nozzle capacity: Max. 100 l/h. Return flow: Max. 120 l/h. Separation capacity air/gas: approx. 4 l/h. Mounting position: Float housing vertical. Ambient: Max. 60°C. Operating: Max. 60°C, special version max. 80°C. Operating overpressure: Max. 0.7 bar (corresponds to static oil column of ca. 8 m). Test pressure: 6 bar. Dimensions (WxHxD): 95x200x95mm

    FloCo-TOP-K and M with Integrated Filter  69960  69959

FloCo-TOP-K Oil De-aerator

FloCo-Optimum-K Oil De-aerator

 

 

 


Automatic fuel oil de-aerator, safety version with integrated filter and stop valve for use in single-line
systems with return pipe connection. Metal housing. Plastic de-aerator hood. With additional plastic hood and safety float which prevents the oil foam from escaping via the de-aerator opening. In addition, it is possible to detect malfunctions in the de-aeration system.  Connections for suction and return hoses 3/8” male thread with inner conical section.  Connection to tank 3/8” female thread.  With short sintered plastic insert 50 μm and short, transparent filter bowl. FloCo-TOP-M version has metal de-aerator hood. FloCo-OPTIMUM-K version has long filter bowl/insert. FloCo-OPTIMUM-M version has long filter bowl/insert and metal de-aerator hood.

Benefits:
• Fuel oil de-aerator, filter and stop valve in a single compact unit.
• Safety version with metal hood for universal application.
• Safety version reliably prevents oil foam from escaping.

Specification: Burner connection: 3/8” male with 60° cone for burner hoses. Tank connection: 3/8” female. Nozzle capacity: Max. 100 l/h. Return flow: Max. 120 l/h. Separation capacity air/gas: 4l/h. Mounting position: Float housing vertical. Ambient: Max. 60°C. Operating: Max. 60°C (please enquire for higher temperatures). Operating overpressure: Max. 0.7 bar (corresponds to static oil column of ca.8m). Test pressure: 6 bar. Dimensions (WxHxD): FloCo-TOP-K/M: 165x272x95mm. FloCo-TOP-OPTIMUM-K/M: 165x366x95mm

    FloCo-TOP-KM with Filter and Vacuum Gauge 69980

FloCo-TOP-KM Oil De-aerator

 

Automatic fuel oil de-aerator, similar to FloCo-TOP-K, but with vacuum gauge for indication of the degree of pollution of the filter. In addition, a possible static pre-pressure of up to 0.7 bar is indicated. The stop valve can be closed to check the suction capacity of the burner pump. FloCo-TOP-MM version has metal de-aerator hood.

    FloCo-TOP-KMF with Fine Filter and Vacuum Gauge   69999

FloCo-TOP-KMF Oil De-aerator

 

Similar to FloCo-Top-K, but with a fine filter cartridge exchange system. Especially suited for small burner capacities due to the large filter surface (840 cm2) and ultrafine mesh size (12-30μm). The gauge is used to determine when the filter needs to be replaced.

 

 

 

Valid XHTML and CSS.