PDF Print E-mail


 Boiler Fittings

    KFE Boiler Feed and Drain Cock - Nicklel Plated 42407

Boiler Feed and Drain Cock

 
KFE Boiler Feed and Drain cock. Ball valve version made from brass and nickel plated.
Connections: ½” male thread with PTFE sealing ring and locking nut, and ½” male hose connection with ¾” union nut and blind cap with chain or strap.

 

 

    KFE Boiler Feed and Drain Cock - Natural Brass 42401

Boiler Feed and Drain Cock

 


KFE Boiler Feed and Drain cock. Ball valve version made from brass.Connections: ½” male thread with PTFE sealing ring and locking nut, and ½” male hose connection with ¾” union nut and blind cap with chain or strap.

 

    G1-T Pump Ball Valve 41945

G1-T Pump Ball Valve

 


Pump ball valves and combination valves with 1” female thread, at pump end with flange and union nut 1½”. Max. operating pressure PN 10, max. operating temperature 110 °C. 
Hand wheel with integrated thermometer, with or without gravity brake.
Union nut and seal are not included.

 

    G1-K Pump Ball Valve 41944

G1-K Pump Ball Valve

 


Pump ball valves and combination valves with 1” female thread, at pump end with flange and union nut 1½”. Max. operating pressure PN 10, max. operating temperature 110 °C. Long Bar Handle, with or without gravity brake.
Union nut and seal are not included.

    WMS-WP6 Boiler Low Level Water Alarm- Mechanical    42300

WMS-WP6 Boiler Low Level Water Alarm - Mechanical

 


This mechanical boiler water low level alarm with float for sealed heating systems according to DIN EN 12828 consists of a cast brass body with DN 20 welding socket and a float mechanism, an electrical switch, test and manual re-set buttons.

TÜV-tested as a water level switch for a max. operating pressure of 10 bar and a max. operating temperature of 120°C.
Designed  for heating systems according to DIN EN 12828. If the water level in the boiler drops below a minimum  level, a float activates a switch which interrupts the power supply to the burner. A locking mechanism prevents the burner from restarting automatically.
The test button allows the float to be lowered to simulate a low water alarm condition

WMS-WP6, brass (without locking mechanism)
Low water level alarm switch similar to WMS-WP6, but without reset.
For use in systems where a remote control panel re-set facility is provided

Technical Specifications
Housing: Cast brass. Float: Plastic. Height: 358 mm. Welding socket: DN 20.
Max. operating temp.: 120 °C. Max. operating pressure: 10 bar. Test pressure: 15 bar
Contact rating: 250Vac, 10(3)A. Protection: IP54 (EN 60529). Approval:TÜV.HWB.02-232

    WMS-2-1 Boiler Low Level Water Alarm - Electronic   42351/42356

 

WMS 2-1 Boiler Low Level Water Alarm - Electronic

WMS 2-1 Controller


 


This self-monitoring electronic boiler water low level alarm with integrated power failure lock operates on the conductivity principle. Consisting of control unit with test and re-set buttons, angled probe with welding sockets, electrode and electrode test facility. TÜV-tested and suitable as a boiler water low level alarm for a max. operating pressure of 10 bar and a max. operating temperature of 120 °C. Designed for use in heating systems according to DIN EN 12828.According to VdTÜV sheet 'Water Level 100' of 05/2002.
If the water level in the boiler drops below a minimum level, the electrode is no longer submerged. The electronic system de-energizes a relay which switches off the power supply to the burner and activates the alarm lamp. The electrical locking mechanism prevents the burner from restarting automatically.

WMS 3-1 Boiler water low level alarm similar to WMS 2-1, with external power failure locking.
WMS 2-1-2
Boiler water low level alarm similar to WMS 2-1, but with probe R2.
WMS 3-1-2
Boiler water low level alarm similar to WMS 3-1, but with probe R2.

Technical Specifications
Supply voltage: AC 230 V. Relay contact: 1 changeover contact. Contact rating: 230Vac, 2A
Operation indicator: Green LED. Electrode voltage: 12 V max. Temperature range: 0/+55 °C
Dimensions W x H x D: 97 x 163 x 62 mm. Protection: IP42 (EN 60529)
Approvals: TÜV.HWB.04-345 TÜV. HWB.04-348

    KSG - 3 Bar with  Insulation   77938

KSG – 3 bar with insulation

 


Pre-assembled boiler safety equipment group for sealed heating systems according to DIN EN 12828 with a capacity of up to 50 kW.
Consisting of: Carrier made of solid cast brass with 1” female boiler connection, approved safety valve ½”x ¾”, with PTFE seal ring, for flexible positioning - response pressure 3 bar, for capacities of up to 50 kW, pressure gauge for heating installations 0-4 bar Ø 63,⅜ bottom connection, with mounting valve, air vent ⅜, 12 bar, with mounting valve and preformed insulation.

• Time saving installation with pre-assembled,leak tested assembly.
• Service friendly – pressure gauge and air vent with self-sealing mounting valves, can be replaced without draining the system.
• Safe venting due to top mounted connection for air vent.
• Environmentally friendly – packing material is used as the insulation.

    KSG MINI- 3 Bar with  Insulation   77623

KSG Mini – 3 bar with insulation

 


Similar to KSG, but light weight version and Ø 50 mm pressure gauge.
Pre-assembled boiler safety equipment group for sealed heating systems according to DIN EN 12828 with a capacity of up to 50 kW.
Consisting of: Carrier made of solid cast brass with G1 female boiler connection, approved safety valve ½” x ¾”, with PTFE seal ring, for flexible positioning - response pressure 3 bar, for capacities of up to 50 kW, ⅜” bottom connection, with mounting valve, air vent ⅜”, 12 bar, with mounting valve and preformed insulation.

• Time saving installation with pre-assembled,leak tested assembly.
• Service friendly – pressure gauge and air vent with self-sealing mounting valves, can be replaced without draining the system.
• Safe venting due to top mounted connection for air vent.
• Environmentally friendly – packing material is used as the insulation.

    KSG MAXI- 3 bar without Insulation   77625

KSG Maxi – 3 bar without insulation

 


Pre-assembled boiler safety equipment group for heating boilers with a capacity of up to 100 kW. Brass carrier, designed as multiway union, with 1” male thread boiler connection. Safety valve ¾”x 1”, can be rotated, response pressure 3 bar, for capacities of up to 100 kW. Pressure gauge for heating installations 0-4 bar, diameter Ø 63-⅜” back connection, with mounting valve. Air vent ⅜”, 12 bar, with mounting valve. Free connection ¾” and ½” female thread.

• Time saving installation with pre-assembled,leak tested assembly.
• Service friendly – pressure gauge and air vent with self-sealing mounting valves, can be replaced without draining the system.
• Safe venting due to top mounted connection for air vent.

    Safety Valves

Safety ValveSafety Valve with Pressure Gauge

 


MS Diaphragm safety valve
- brass
For sealed heating systems according to TRD 721; VdTÜV sheet. Safety Valve 100 and 100/4 sheet 1; DIN EN 12828. Suitable for water heating systems according to DIN 4751-2 with supply temperatures of up to 120°C and DIN 4751-3 with supply temperatures of up to 95°C.
Opening pressure factory pre-set to 2.5 or 3 bar. Brass housing.
The size of the valve inlet determines the type of unit, the outlet is ¼” larger.

MSM Diaphragm safety valve
: Similar to MS diaphragm safety valve - brass, but with pressure gauge.


 

 

 

Valid XHTML and CSS.